3312 Double Row Angular Contact Ball Bearing Corrosion Resistance Size 60x130x54mm Weight 2.8 Kgs

Angular contact ball bearings can withstand radial and axial loads, as well as pure axial loads, and can work at a higher speed. Single row angular contact ball bearings can only bear axial loads in one direction. When subjected to a radial load, additional axial forces are induced and the axial displacement of the shaft or housing can only be limited in one direction.

If it is installed in pairs, the outer ring of a pair of bearings is opposite to the same end face, and the wide end faces the wide end face, and the narrow end faces the narrow end face, so that additional axial force can be avoided, and the shaft or shell can be limited in the axial clearance in both directions.

The number of balls in angular contact ball bearings is more than that of deep groove ball bearings, so the load capacity is the largest in the ball bearings, and the rigidity is strong and the operation is smooth. Radial clearance can be adjusted by mutual displacement of inner and outer rings.

Technical Specification 3312 ball bearing:

Typical Applications for Angular contact ball bearings:

· Agriculture, Construction and Mining Equipment

· Various Axle Systems

· Conveyance Vehicles

· Gear Box, Engine Motors, Reducers

3312 Double Row Angular Contact Bearing

60x130x54mm Double Row Angular Contact Bearing

3312 Bearing

3312 Double Row Angular Contact Bearing Corrosion Resistance Size 60x130x54mm Images